9 SPARES
The Elcometer 3000 Clemen Unit is complete with all the items required to get
started, however over the life of the tester replacements may be required.
The following replacement items and optional accessories are available from
your local supplier or direct from Elcometer:
Description
c
Adjustment kit
to test samples 0.5 mm to 20 mm thick
(0.02" to 0.8" thick)
Illuminated microscope x30
Magnifier x 10
1 mm (0.04") Ball Tool (tungsten carbide)
2 mm (0.08") Cutting Tool (tungsten carbide)
VW Cutting Tool
1 cm² (0.16 inch²) Rubber Tool for Drying Time
10 RELATED EQUIPMENT
In addition to the Elcometer 3000 Clemen Unit, Elcometer produces a wide
range of other equipment for determining the physical characteristics of surface
coatings. Users of the Elcometer 3000 may also benefit from the following
Elcometer products:
•
Elcometer 3030/3040 Pendulum Hardness Tester
•
Elcometer 3092 Sclerometer Hardness Tester
For further information contact Elcometer, your local supplier or visit
www.elcometer.com
c. Adjustment Kit is for Elcometer 3000/3 Motorised Clemen Unit only - see "Testing thick
samples" on page 10.
Part Number
KT003000N015
KT007210M001
KT001546N002
KT003000P021
KT003000N001
KT003000N013
KT003000N002
R
15