Appendix 4: Faceplate And Trims Installation - Osburn 1700-I Installation And Operation Manual

APPENDIx 4: FACEPLATE AND TRIMS INSTALLATION

Remove the faceplate extension (K) secured between the firebox and the convection air jacket.
1.
2. Place the faceplate panels with the finished side down on a flat, soft, non-abrasive surface.
Line up the holes of the upper faceplate panel (L) with the holes of the side panels (M) and (N).
Secure them together using four bolts (O) and nuts (P) provided.
Page 42
K
O
L
P
DETAIL A
A
N
M
Installation and Operation Manual - Osburn 1700-I