Conducting An Ir Hotsync Operation - Sony clie PEG-SL10 Operating Instructions Manual

Advanced Hot Sync

Conducting an IR HotSync operation

You can use the IR (infrared) port of your CLIÉ handheld to perform an IR
HotSync
Association) IR port. An IR HotSync operation allows you to perform a
HotSync operation without using the USB cable.
Before you start performing an IR HotSync operation
Check the following:
• Your computer is equipped with an infrared port supporting the IrDA
standards.
• The infrared port of your computer is enabled for Windows use.
To enable the IR port with Windows, see the manual of the computer you
are using or the Windows online help.
• Which port number is allocated to the infrared port.
Check the infrared port number in the Infrared Monitor in the Control
Panel. For information on the Infrared Monitor, see the manual of the
computer you are using or the Windows online help.
Preparing your computer
To perform an IR HotSync operation, you have to allocate a virtual port to
an IR HotSync operation.
Window s 2000 Professional/ Window s XP users:
1
Window s 98/ 98 Second Edition/ M e users:
1
2
Chapt er 3
Downloaded from:
®
operat ions
®
operation with a computer equipped with an IrDA (Infrared Data
Click t he Hot Sync
right corner of t he t askbar), and select IR f rom t he short cut
menu.
Your computer is ready to perform an IR HotSync operation.
Click t he Hot Sync
right corner of t he t askbar) and select Local Serial f rom t he
short cut menu.
Click t he Hot Sync
and select Set up f rom t he short cut menu.
The setup dialog box is displayed.
Exchanging and updating data using a HotSync
https://www.usersmanualguide.com/
icon in t he Window s t ask t ray (bot t om-
icon in t he Window s t ask t ray (bot t om-
icon in t he Window s t ask t ray again
® operation
Continued on next page
111