If You Still Cannot Perform A Hotsync ® Operation - Sony clie PEG-SL10 Operating Instructions Manual

Troubleshoot ing – Frequent ly Asked Quest ions
If you still cannot perform a HotSync
If you have reviewed items in the troubleshooting list and the HotSync
operation problem persists, review the following.
You cannot perform a HotSync operation before you install the
Palm Desktop for CLIÉ softw are on your computer
If you perform a HotSync operation before you install the CLIÉ drivers,
other drivers may be installed. Make sure to install the Palm Desktop for
CLIÉ software first and then perform a HotSync operation.
Do not use a USB hub
If you connect the USB cable to your computer via a USB hub, you may not
be able to perform a HotSync operation properly. Make sure to connect the
USB cable directly to a USB port of your computer.
Some computers have the hub function built into their internal circuity.
Contact your computer manufacturer if the USB port of your computer is
connected to an internal USB hub.
Check that the USB port of your computer is enabled
If you are using Windows 95 pre-installed computer or another old type of
computer equipped with a USB port, the USB port may be disabled by
default. If another device such as a USB mouse cannot be used, check the
BIOS setting of your computer.
Also check the Device Manager. Right-click on My Computer and select
Properties. Click Device Manager tab and check that USB controller is listed
in the Device Manager screen.
Chapt er 6
Downloaded from:
Additional information
https://www.usersmanualguide.com/
®
operation
®
213