Input Module Operation
Standard Modules
DC INPUT
DC INPUT
DC OUTPUT
ANALOG INPUT
5069-IB16
5069-IB16
5069-OB16
5069-IY4
DC INPUT
DC INPUT
DC OUTPUT
5069-IB16
5069-IB16
5069-OB16
UPS
R
R
OK
FAN 1
B
B
RUN
SD
F
F
FORCE
FAN 2
MP
NET B1
LINK B1
NET A1
LINK A1
SA
NET A2
SPEED X1
LINK A2
LINK X1
CompactLogix 5480
™
Safety Modules
OUTPUT
SIL2 CPU
5069-L3100ERMS2
5069-IB8S
5069-IB8S
5069-OBV8S
Compact GuardLogix
Logix 5000 controllers do not poll the Compact 5000 I/O standard or safety
input modules for input data.
The data exchange process between the input modules and the controller
differs based on whether the module is a local I/O module or remote I/O
ANALOG OUTPUT
5069-OF8
module.
Local Compact 5000 I/O Digital Input Modules
Local Compact 5000 I/O digital input modules broadcast their input data,
ANALOG INPUT
ANALOG OUTPUT
that is, channel and status data, to the system backplane at the time that is
5069-IY4
5069-OF8
defined in the RPI.
At the RPI, the following events occur.
1. The local input module scans its channels for input data.
2. The module sends the data to the system backplane.
3. The controller receives the data immediately.
OUTPUT
5069-OBV8S
Trigger Events for Standard Input Modules
IMPORTANT Compact 5000 I/O safety input modules cannot trigger events.
Some Compact 5000 I/O standard input modules can trigger an event. For
example, the modules can trigger the Event task. The event task lets you
execute a section of logic immediately when an event, or receipt of new data,
occurs.
The following can trigger events:
• An input state change.
• A counting input done bit change.
• A pattern of input state changes on multiple module inputs.
For more information on how to use a Compact 5000 I/O standard input
module to trigger an event, see
Rockwell Automation Publication 5069-UM004A-EN-P - April 2019
Digital Module Operation in a Control System
Events on page
93.
Chapter 1
49