Siemens SINUMERIK 840D sl Manual page 63

● The following buttons are important for operation as SINUMERIK operator panel:
To configure the SIMATIC Thin Client, press the button "Settings". You therefore open the
"Operator panel service system":
To exit the SINUMERIK mode, press the button "Close".
● To make the configuration settings, press the button:
Select "Configure Thin Client":
To exit the SIMATIC configuration menu, press the button "Close".
● Press the button to activate the integrated keyboard:
Preconditions
To make the following settings, you must be logged on as administrator.
1. Press the "Settings" button:
2. Log on as a administrator using the specified password.
Result: As administrator you can see the complete menu of the SIMATIC Thin Client.
Note
All changes only become effective after pressing the "Enter" button on the "Virtual Keyboard"
on the relevant side.
Operator panel front: OP 012
Manual, 09/2016, A5E36371591B
General information and networking
1.4 Networking
63