Advertisement
4c.
Close group
4d.
Verify the group
4e.
Lock the group
Luminaire
Luminaire
Point to any of
the luminaires
added in the
group and
press "close."
Luminaire
Luminaire
Point to any of the
luminaires in the
group and press
"off" and "on."
off
If any luminaires in the group do not turn ON/OFF, they are not
part of the group. Go back to step
in to the group.
Luminaire
Luminaire
Point to any of
the luminaires
in the group
and press "lock."
Wait for LED to
stop blinking
(apx. 10 seconds)
then press "send."
70% G
on
4a
to add the luminaires back
O )))
All the luminaires in the
group will go to 50%
light level.
Luminaire
All the luminaires in the
group will turn
OFF and ON together.
Luminaire
Red LED on
remote will
start blinking.
The luminaire will
FLASH twice and
group will turn OFF
and ON once for
daylight calibration.
Group is ready for
normal operation.
Luminaire
II
7
Advertisement
