Advertisement
4.
Create a group
Grouping is required to initiate system functionality and dimming behaviors.
4a.
Open Group
4b.
Add luminaires to group
Repeat step for adding all the luminaires in the group.
6
Philips Lighting Controls
The Luminaire/s have to be in a factory new state to group them
together. If changes were previously made on the luminaires
then perform a factory reset as per the troubleshooting instructions
on page 30 of this manual.
All actions are to be performed by standing underneath a luminaire
and pointing the remote directly towards the luminaire sensor.
Luminaire
Luminaire
Point remote to
any luminaire
and press
"open," once.
Make sure the button is pressed only once. Pushing multiple times
can create multiple networks which can cause undesired operation.
Luminaire
Luminaire
Walk to the next
luminaire to be
added to the
group, point to
the luminaire
and press "add."
Wait for the luminaire to
dim down to 5%.
Luminaire
Luminaire will dim
down to 5%.
add
Luminaire
Advertisement
