Advertisement
7.
Daylight Calibration
7a.
Unlock the group
7b.
Calibrate the group
Daylight calibration should be performed during night time.
Daylight calibration is set for all the luminaires in the group.
Luminaire
Luminaire
Point to any of
the luminaires
in the group and
press "unlock."
Wait for LED to
stop blinking
(apx. 10 seconds)
then press
"send."
Luminaire
Luminaire
Point remote to any of the
luminaires and adjust the
group light level to the
required level using the
dimming "up" or "down"
arrow keys
O )))
or
Red LED on
remote will
start blinking.
Red LED on
remote will
BMS
stop blinking.
The luminaire will
FLASH twice and
group light level
will go to 50%.
Luminaire
When the
arrow keys
are pressed,
red LED on
remote will
keep blinking.
The group
will dim up
or down
accordingly.
II
II
II
27
Advertisement
