Advertisement
7c.
Rocker switch
Remove the rocker pad cover of the switch by applying pressure at the
back of the switch. You will find 4 small buttons behind the rocker pad.
7d.
Link the switch
Select the correct wireless channel by
pressing and holding one of the small
buttons (1) and horizontal bar (2) for at
least 10 seconds.
7e.
Program the switch
If the switch did not join the group as
per step d then repeat step d but with
a different button (1) this time.
+
10 sec.
12 Philips Lighting Controls
1
1 + 2
10 sec.
1
+ 2
Step
7d
is a trial and error process. The 4 buttons signify 4 different
wireless channels. To join the switch to the luminaire group the
wireless channel of the switch and the luminaire must match. Since
the wireless channel of the luminaire is not visible, one has to try out
all the 4 channels via the buttons to determine the matching channel
as described in step 7e.
or
+ 2
2
10 sec.
1
1
2
or
1
+ 2
10 sec.
If the switch joins
the group then the
luminaire will FLASH
twice and group light
level will go to 5%.
Luminaire
If the switch joins
the group then the
luminaire will FLASH
twice and group light
level will go to 5%.
Luminaire
Advertisement
