Advertisement
7.
Link a wireless switch to a group
Up to 5 switches and scene selectors can be linked together in a group.
The switch uses EnOcean technology and does not need batteries or any
power supply. Every time the switch is physically pressed it generates
energy and transmits a wireless message to the luminaires.
7a.
Unlock the group
7b.
Open Group
• A small press and release action on the rocker will turn
on or turn off the lights.
• A long press and hold action on the rocker will dim the
lights accordingly.
Luminaire
Luminaire
Point to any of
the luminaires
in the group and
press "unlock."
Wait for LED to
stop blinking
(apx. 10 seconds)
then press
"send."
Luminaire
Luminaire
Point remote to
any luminaire
and press
"open," once.
Make sure the button is pressed only once. Pushing multiple times
can create multiple networks which can cause undesired operation.
Red LED on
remote will
start blinking.
Red LED on
O )))
remote will
stop blinking.
The luminaire will
FLASH twice and
group light level
will go to 50%.
Luminaire
Wait for the entire
luminaire group to
dim down to 5%..
Luminaire
II
II
BMS
11
Advertisement
