Advertisement
7c.
Save the calibration
7d.
Lock the new light level
28 Philips Lighting Controls
Luminaire
Luminaire
Point to the same
luminaire in the group and
press the "save" button,
the light level is stored as
a new daylight set-point.
save
Luminaire
Luminaire
Point to any of
the luminaires
in the group
and press "lock."
Wait for LED to
stop blinking
(apx. 10 seconds)
then press "send."
Red LED on
remote will
start blinking.
The luminaire will
FLASH twice and
group light level
will go to 50%.
Luminaire
Red LED on
remote will
start blinking.
The luminaire will
O )))
FLASH twice and the
group will adjust its light
level as per the new
daylight set point.
Luminaire
II
II
Advertisement
