Advertisement
8b.
Open Group
8c.
Link the scene selector
Select the correct wireless channel
by pressing and holding one of the
4 buttons for at least 10 seconds and
then release the button.
8d.
Program the scene selector
If the switch did not join the group as
per step d then repeat step d but with
a different button (1) this time.
Luminaire
Luminaire
Point remote to
any luminaire
and press
"open," once.
Make sure the button is pressed only once. Pushing multiple times
can create multiple networks which can cause undesired operation.
10 sec.
Step
8c
is a trial and error process. The 4 buttons signify 4 different
wireless channels. To join the scene selector to the luminaire group
the wireless channel of the scene selector and the luminaire must
match. Since the wireless channel of the luminaire is not visible, one
has to try out all the 4 channels via the buttons to determine the
matching channel as described in step 8d.
or
or
or
or
10 sec.
10 sec.
Wait for the the entire
luminaire group to dim
down to 5%.
If the switch joins
the group then the
luminaire will FLASH
twice and group light
level will go to 5%.
10 sec.
Luminaire
Luminaire
If the switch joins
the group then the
luminaire will FLASH
twice and group light
level will go to 5%.
Luminaire
15
Advertisement
