Setting The Timeout Of The Lcd Screen; Setting The Switch Level For The Backlight - Philips Pronto NG User Manual

2 To increase the timeout, press (and hold) the button labelled '+'.
-or-
To decrease the timeout, press (and hold) the button labelled '-'.
3 Tap
The new LCD backlight timeout is set.

Setting the Timeout of the LCD Screen

The timeout of the LCD screen determines how long the LCD touch screen stays
active before turning off. Shortening the active time will increase Pronto NG's
battery life.
Note
1 Tap
The LCD Timeout button is selected. The '+' and '-' labels appear on the two
middle firm keys below the touch screen.
2 To increase the timeout, press (and hold) the firm key labelled '+'.
-or-
To decrease the timeout, press (and hold) the firm key labelled '-'.
3 Tap
The new LCD screen timeout is set.

Setting the Switch Level for the Backlight

You can set the backlight of your Pronto
to switch on or off according to the
ambient light of your home theatre
environment.
By positioning the threshold indicator
you define when the backlight switches on or off.
Setting the switch level
1 Tap
The Light level button is selected. The '+' and '-' labels appear on the two
middle hard buttons below the touch screen.
2 Press and hold the hard buttons labelled '+' and '-' to position the
indicator.
1 To set the switch level for a dark environment, position the
2 To set the backlight always on, position the indicator at the far right.
User Guide
31
The LCD screen will only time out when you are not using Pronto NG.
indicator at the right side of the light level bar.
The backlight will switch on even at a high ambient light level.
Customising Pronto NG
again.
in the first Settings Page.
again.
in the first Settings Page.
Ambient light level
Threshold indicator
EN