Omron CJ1W- ECT21 Operation Manual page 26

Related Manuals
Manual name Cat. No.
NJ/NX-series CPU Unit W501
Software User's Manual
Sysmac Studio Version 1 W504
Operation Manual
NJ/NX-series CPU Unit W505
Built-in EtherCAT® Port
User's Manual
24
Model numbers
Learning how to program
NX701-
and set up an
NJ501-
NJ/NX-series CPU Unit.
NJ301-
Mainly software informa-
NJ101-
tion is provided.
Learning about the operat-
SYSMAC-SE2
ing procedures and func-
tions of the Sysmac Studio.
Using the built-in EtherCAT
NX701-
port on an NJ/NX-series
NJ501-
CPU Unit.
NJ301-
NJ101-
Application
The following information is provided on
an NJ/NX-series CPU Unit.
• CPU Unit operation
• CPU Unit features
• Initial settings
• Programming based on IEC 61131-3
language specifications
Use this manual together with the
NX-series CPU Unit Hardware User's
Manual (Cat. No. W535) or the NJ-series
CPU Unit Hardware User's Manual (Cat.
No. W500).
Describes the operating procedures of
the Sysmac Studio.
Information on the built-in EtherCAT port
is provided.
This manual provides an introduction and
provides information on the configuration,
features and setup.
Use this manual together with the
NX-series CPU Unit Hardware User's
Manual (Cat. No. W535) or NJ-series
CPU Unit Hardware User's Manual (Cat.
No. W500) and with the NJ/NX-series
CPU Unit Software User's Manual (Cat.
No. W501).
CJ-series EtherCAT Slave Units Operation Manual (W541)
Description