Maxxus RunMaxx 6.3 Installation & Operating Manual page 25

Cockpit
Fitness training with the FitShow App
The cockpit of your treadmill is fitted with a Bluetooth receiver as standard. Scan the QR code on the back of
this manual to download the FitShow App on a smartphone or tablet PC.
Step 1:
Download and install the FitShow App from the App Store / Play Store on a Smartphone or tablet PC.
Step 2:
Register with FitShow. Please use a valid e-mail address, because you will be sent a confirmation code by
e-mail.
Step 3:
Make sure the treadmill is on! Now go to the application homepage and press "Search." The treadmill will now
be displayed. Once you have selected your treadmill you can use the app.
Email/Phone
Password
max_mustermann
max@mustermann.de
RunMAXX 6.3
Note:
Please note that we provide only general instructions for using the device with an APP. For specific advice on
the App and / or the Smartphone or tablet PC you are using, please contact your supplier directly
Playback of an audio source
This exercise device has two options to play back an audio source over the built-in cockpit speaker. ENG
1. Connect an external audio source via the MP3 RCA connector
External Audio sources (MP3 player, smartphone, etc.) can be connected to the exercise via the Cinch con-
nection on the front side of the cockpit using the audio cable (3.5mm jack) supplied. Check that the external
audio source has a matching connector for this cable. Once the external music source has been connected and
playback has started, playback of the music, audiobook, etc. starts over the loudspeakers.
WARNING:
Volume, start, pause, etc. is controlled using the external audio source, the smartphone. Control from the cock-
pit is possible using the USB method below!
25