Table of Contents
Advertisement
4-5 Repeat Playback
You can perform repeat playback
playback.
To perform repeat playback, set extended menu item 142
"REPEAT MODE" to "play," and then proceed as follows.
1) This is supported from firmware version 1.4.
1
Insert a disc.
To perform repeat playback for normal playback,
proceed to step 3.
2
To perform repeat playback for clip list playback,
press the SUBCLIP button.
3
Press the PLAY button.
Playback starts from the saved playback position, and
"Repeat Play" appears in the time data display for 2.5
seconds.
Normal play: When playback of the last clip finishes,
it resumes from the start of the disc, repeatedly
playing from the first through the last clip on the
disc.
Clip list play: When playback of the last sub clip
finishes, it resumes from the start of the clip list,
repeatedly playing from the first through the last
sub clip in the clip list.
If extended menu item 142 "REPEAT MODE" is set
to "play," repeat playback starts from the first clip
automatically whenever you power the unit on with a
disc loaded. Clip list playback starts from the first sub
clip in the clip list.
To stop repeat playback
Operate any of the playback buttons except the PLAY
button, or operate the jog or shuttle dial.
The unit executes the operation for the button press, or jog
or shuttle dial operation. (The unit enters search mode
when you conduct a search, and stop mode at the end of the
disc.)
To disable repeat playback
Set extended menu item 142 "REPEAT MODE" to "off."
1)
for normal and clip list
4-6 Locking and Deleting
Clips
In the thumbnail screen, you can delete selected clips or
lock them so that they cannot be deleted.
1) This is supported from firmware version 1.5.
4-6-1 Locking Clips
Locking prevents the following operations on clips.
• Deletion
• Renaming by FAM or FTP
Notes
• Locked clips are erased along with other clips when you
format a disc.
• Clips cannot be locked or unlocked when the Write
Inhibit tab of the disc is set to the recording disabled
position, or when extended menu item 310 "REC
INHIBIT" is set to "on."
1
With the SUBCLIP button off, press the
THUMBNAIL button, turning it on.
The thumbnails of the clips on the disc appear.
2
Use the arrow buttons or the jog dial to select the clip
to lock.
You can select clips with the following operations.
Press the PREV or NEXT button: Move to the
previous or next clip.
Press the PREV or NEXT button with the SHIFT
button held down: Move to the first or last clip.
Press the F/f button with the SHIFT button held
down: Switch to the previous or next page.
3
With the SHIFT button held down, press the
SUBCLIP button. Or press the MENU button.
The THUMBNAIL MENU appears.
4-5 Repeat Playback / 4-6 Locking and Deleting Clips
1)
39
Advertisement
Table of Contents
