Configure Multi Sensor - Honeywell H4L6GR2 User Manual

Ultra HD IP Camera User Guide
3.
4.
5.
6.

Configure Multi Sensor

Note
You can configure the Multi Video Sensor to optimize the image stitching on the Setup >
System Setup > Multi Video Sensor page
To configure the Multi Video Sensor:
1.
2.
62
a. Select the Enable DST check box.
b. Set DST Type to Week.
c. Set Start Time to Mar 2nd Sunday 02:00:00 AM.
Set End Time to Nov 1st Sunday 02:00:00 AM.
d.
Select the Synchronize with NTP check box.
If you want, you can change the NTP Server from the default (time-a.nist.gov).
In Update Period field, enter the interval at which you want the camera's date and time
to synchronize with the NTP server. You can enter a value between 0 and 30.
Click Save to apply the settings.
Only for HM4L8GR1 and HMBL8GR1.
When the camera installation is completed, let the lens focus on an open field.
Click Start.
.