BEA ACTIV8 THREE PULSE User Manual

BEA ACTIV8 THREE PULSE User Manual

Combined radar opening and active infrared safety sensor for escape route doors

Advertisement

Quick Links

1
2
Radar Antenna
nd
Radar motion
sensor
Radar Antenna clip
Radar tilt angle
indication
2
LED turns on
LED flashing slowly
LED display during normal function
GREEN LED
RED LED
ORANGE LED Troubleshooting
3
Use the Remote Control to
adjust the sensor.
Avoid vibrations!
ACTIV8 THREE PULSE
COMBINED RADAR OPENING AND ACTIVE INFRARED SAFETY SENSOR FOR ESCAPE ROUTE DOORS
45°
30°
15°
LED flashing quickly
Motion detection
Presence detection
Use the Spotfinder to locate
the safety curtains.
Do not cover the sensor!
ACTIV8 THREE PULSE
Motion detection
Presence detection
Insert the prism
correctly into the guiding
controller cover is fixed
grooves!
properly and electrically
Avoid moving objects in
proximity to the sensor!
fluorescent lighting in the
USER'S GUIDE
DESCRIPTION
SYMBOLS AND LED
x
See page x
INSTALLATION
Make sure the door
Avoid touching electronic
earthed.
Avoid HF lamps and
Avoid highly reflective
objects in the infrared field!
infrared field!
Cover
Push Buttons
IR- sensor
IR-prism
Main Connector
IR curtain adjustment
screw
x
Factory value
7
and/or
optical parts!
1/8

Advertisement

Table of Contents
loading

Summary of Contents for BEA ACTIV8 THREE PULSE

  • Page 1 ACTIV8 THREE PULSE USER’S GUIDE COMBINED RADAR OPENING AND ACTIVE INFRARED SAFETY SENSOR FOR ESCAPE ROUTE DOORS DESCRIPTION Cover Radar Antenna Push Buttons Radar motion IR- sensor sensor IR-prism Radar Antenna clip Main Connector 45° IR curtain adjustment 30° Radar tilt angle 15°...
  • Page 2: Mounting The Sensor

    Width of radar motion sensing field: choice of antenna Touching the antenna patches will not Sensitivity = 9 Sensitivity = 9 cause any damage! Depth of radar motion sensing field: tilt angle of radar-module Sensitivity = 9 Sensitivity = 9 ACTIV8 THREE PULSE...
  • Page 3 The pin indicates the angle. When mounting one sensor on each side of the door above a highly reflective threshold, select different frequencies to avoid crosstalk between the sensors. ACTIV8 THREE PULSE...
  • Page 4 OF PRESENCE DETECTION 30 seconds 1 minute 2 minutes 5 minutes 10 minutes 20 minutes 60 minutes IR CURTAIN IMMUNITY normal SETUP increased rain mode launch snow mode setup snow mode enhanced launch assisted setup restore factory settings ACTIV8 THREE PULSE...
  • Page 5 INSTALLATION CONFIGURATION MOUNTING PULSE HOLD TIME HEIGHT FREQUENCY 0 (0.5s) > 9 (9s) high high high high DETECTION MODE bidirectional mode unidirectional mode unidirectional mode with MTF IMMUNITY detection of quasi presence normal increased additional increased immunities ACTIV8 THREE PULSE...
  • Page 6: Installation Tips

    Push the left push button to release the outputs. The door should close and the LED should switch off. Push Buttons For more information on the use of the push buttons, ask our quick reference guide “How to use push buttons”. ACTIV8 THREE PULSE...
  • Page 7: Troubleshooting

    The sensor does not unlock when access Wrong code being entered. Cut and restore power supply. No code is required to code is entered. unlock during the first minute after powering. Press on “unlock”, then on “lock” and introduce a new access code. ACTIV8 THREE PULSE...
  • Page 8: Technical Specifications

    Antenna wide field Prism 1 m Prism 2 m Liege Science Park • Allée des Noisetiers, 5 • 4031 Angleur • Belgium • TEL +32 (0)4 3616565 • FAX +32 (0)4 3612858 • e-mail: info@bea.be • www.beasensors.com ACTIV8 THREE PULSE...

Table of Contents