Hardware Specifications; Status Indicators - Omron E3NW-CCL User Manual

5-3

Hardware Specifications

5-3-1

Status Indicators

These indicators show the current status of the E3NW-CCL.
RUN Indicator
This indicator shows the operating status.
Color
Not lit.
Green
Lit.
ERR Indicator
This indicator displays errors.
Color
Not lit.
Flashing
Red
Lit.
SS Indicator
This indicator compares the number of Sensor Units connected when power was turned ON to the
number of Sensor Units actually connected and indicates the Sensor connection status.
Color
Not lit.
Green Lit.
Red Lit.
E3NW-CCL CC-Link Digital Sensor Communications Unit User's Manual (E431)
RUN
ERR
SS
State
CC-Link communications are disconnected or the Unit is
being reset.
CC-Link communications are in progress.
State
Normal transmission
The station setting switch or baud rate setting/operating
mode setting switch was changed during communications.
Communications error or station number setting out of
range
State
No Sensor Amplifier Units are connected or initialization is
being performed after the power supply was turned ON.
Normal: The number of connected Sensor Units when
power was turned ON matches the actual number of
connected Sensor Units
Error: The number of connected Sensor Units when power
was turned ON does not match the actual number of
connected Sensor Units
5 E3NW-CCL Hardware Specifications
Description
Description
Description
5
5 - 5