1-2
CC-Link Network Configuration
Elements
This section describes the configuration devices that make up a CC-Link network and their uses.
1-2-1
CC-Link Network Configuration Devices
An example of a CC-Link network is shown below.
Computer
CSP+ file
GX-Works2 Engineering Tool
*(or GX-Developer)
Unit power supply
E3NW-CCL CC-Link Digital Sensor Communications Unit User's Manual (E431)
RS-232C port connection
USB port connection
Communications cable
Digital I/O slaves
ADR
ADR
Servo drive
1 CC-Link Configuration Elements
CC-Link master
I/O power supply
Analog I/O slave
Terminating resistance (110 Ω) must
be connected. Use the Terminating
Resistor that is provided with the
master unit.
ADR
Inverter
E3NW-CCL
Sensor Communication Unit
1 - 3
1