EDAN SE-3 Series User Manual page 38

SE-3&SE-300 Series Electrocardiograph User Manual
1) Environment:
♦
Make sure that there is no electromagnetic interference source around the equipment,
especially large medical electrical equipment such as electrosurgical equipment,
radiological equipment, magnetic resonance imaging equipment etc. Switch off these
devices when necessary.
♦
Keep the examination room warm to avoid muscle action voltages in ECG signals
caused by cold.
2) Power Supply:
♦
If the mains supply is used, please check whether the power cord is connected to the
unit well. The grounded three-phase outlet should be used.
♦
When the battery capacity is low, recharge the battery before use.
3) Patient Cable:
♦
Check whether the patient cable is connected to the unit firmly, and keep it far away
from the power cord.
4) Electrodes:
♦
Check whether all electrodes are connected to lead wires of the patient cable
correctly.
♦
Ensure that the chest electrodes do not contact.
5) Recorder Paper:
♦
Ensure that there is enough recorder paper loaded correctly.
6) Patient:
♦
The patient should not come into contact with conducting objects such as earth, metal
parts etc.
♦
Ensure the patient is warm and relaxed, and breathe calmly.
The electrocardiograph is provided for the use of qualified physicians or personnel
professionally trained, and they should be familiar with the contents of this user manual
before operation.
WARNING
- 31 -
Operation Preparations