EDAN SE-3 Series User Manual page 19

SE-3&SE-300 Series Electrocardiograph User Manual
1) Indicator Lamp
Mains supply indicator lamp: when the device is powered by the mains supply,
the lamp will be lit.
Battery indicator lamp: when the device is powered by a built-in rechargeable
lithium battery, the lamp will be lit.
Battery recharging indicator lamp: when the battery is being recharged, this lamp
will be lit.
2) Sensitivity Switch Key
(SE-3)
The sensitivity switch order: × 10 mm/mV → × 20 mm/mV →10/5mm/mV → × 2.5
mm/mV → ×5 mm/mV.
3) Recall Key
(SE-3)
Press the RECALL key to open the File Manager screen. For details, see chapter 7,
Figure 2-4 SE-300 series Control Panel and Keys
(SE-300 series)
(SE-300 series)
- 12 -
Introduction