EDAN SE-3 Series User Manual page 30

SE-3&SE-300 Series Electrocardiograph User Manual
Casing
Printer Platen
Loading/Replacing Process of Rolled Thermal Paper:
1) Place fingers under the two flanges of the recorder casing, pull them upwards directly to
release the casing.
2) Take out the paper roller, and remove remainder paper from the roller if necessary.
3) Take off the wrapper of the new thermal paper roll, and then put the paper roll through
the roller.
4) Place the paper and the roller gently in the recorder with the roller pin clicking into the
groove.
5) Pull about 2 cm of paper out with the grid side of the paper facing the thermal print
head, and shut the recorder casing.
6) Press down the recorder casing firmly.
- 23 -
Operation Preparations
Paper Tray
Paper Roller
Thermal Print Head
Groove