Horizon Fitness PF-P3100 Manual page 3

III Cautions when handling the print board and ROM
Even an small amount of static electricity that it cannot be felt by people will damage the board or ROM.
Exercise caution on the following points when handling the board or ROM.
Shield Bag
P.C.Board
Conductive
Sponge
Shield Bag
Keep Board in a
shield bag.
Put the ROM on a
conductive sponge
and keep in a shield
bag.
Acrylic
Cover
Clip
Machine
Frame
Wrist
Strap
III
Do not put Board and ROM on the
machine, especially on the acrylic
cover. (No problem on the
conductive plate.)
And keep the Board and ROM away
from the insulators.
Insulators: Plastic, form polystyrene,
chemical fiber fabric,
dry paper, etc.
When replacing the Board and
ROM, or setting the dip switches
and volumes on the Board, wear a
wrist strap, and connect the clip to
the machine frame (not painted
surface).