Delivery Belt Replacement - Horizon Fitness PF-P3100 Manual

3 Adjusting and Checking Procedures

3 - 5 Delivery Belt Replacement

If the delivery belt slips, set the delivery roller shaft at
exit side of the slot on the belt bottom plate.
If the delivery belt slips even with setting the delivery roller
shaft at the exit side of the slot, replace the delivery belt.
Remove the cover F, R and the support
table.
Loosen two locking screws for the
delivery roller shaft.
- Loosen the locking screws for the delivery roller shaft at
exit side on the belt bottom plate. (Fig.2)
Remove the conveyor pulley.
- Remove the delivery drive belt.
- Remove the C snap ring for the conveyor pulley, and pull
out the conveyor pulley. (Fig.2)
- Pull out the PP4-18 parallel pin.
Displace the delivery roller drive shaft
to the front.
- Displace the delivery roller drive shaft to the front, and
make a space for belt replacement. (Fig.3)
Remove the belt bottom plate with the
delivery belt.
- Remove four locking screws on the belt bottom plate,
and remove the belt bottom plate with the delivery belt.
(Fig.4)
Attach new delivery belt in the reverse
order of removal.
- Lock the delivery roller shaft at the center of the slot on
the belt bottom plate.
3 - 5 Delivery Belt Replacement
Set Screws for
Delivery Drive Belt Delivery Drive Belt Delivery Drive Belt
Delivery Roller Shaft
Conveyor Pulley Conveyor Pulley Conveyor Pulley
Belt Bottom
Plate
Delivery Belt
Fig.1
Remove the
delivery drive
belt.
C Snap Ring
(STW-10)
Pull out the
PP4-18
Remove the snap
Loosen the
parallel pin.
ring and pull out the
locking screws
conveyor pulley.
for the delivery
roller shaft.
Fig.2
Approach the
Delivery Roller
delivery belt to the
Drive Shaft
503013
space on the back
3_5_1A
for removal.
When attaching new
belt, align the arrow
direction with the
delivery direction.
503013
3_5_1B
Remove the delivery
belt and the belt bottom
plate from the frame.
3-6
Displace the delivery
roller drive shaft to the
front, and make a space
for belt replacement.
503013
3_5_1C
Fig.3
503013
3_5_1D
Locking Screw
Remove four
locking screws on
the belt bottom plate.
Fig.4