Micro-Switch Adjustment - Horizon Fitness PF-P3100 Manual

3 Adjusting and Checking Procedures

3 - 6 Micro-switch Adjustment

This section indicates the standard position for the
attachment of the three micro-switches used in this
machine.
S10: Fold Section Cover Switch
- ON: When the fold section cover is closed.
- The actuator is pushed by the projection on the fold sec-
tion cover.
- Attach with another 0.5 mm (0.02") push-in margin
when the actuator is pressed.
S12: Feed Bar Switch
- OFF: When the feed tray lever is pushed down.
- The actuator is pushed by the feed tray lever.
- Attach with another 0.5 mm (0.02") push-in margin
when the actuator is pressed.
S13: Feed Table Sheet Detection Switch
- The switch is activated when the actuator is pushed
down by the sheet on the feed table.
- The actuator is pushed by the detection lever.
- Attach with another 0.5 mm (0.02") push-in margin
when the actuator is pressed.
3
Adjusting and Checking Procedures
S12
: Feed Bar Switch : Feed Bar Switch
Feed Tray Lever
Feed Table
Pushdown Shaft
S12
There should be another 0.5 mm
(0.02") push-in margin when the
actuator is pressed.
3 - 6 Micro-switch Adjustment
S10
: Fold Section Cover Switch : Fold Section Cover Switch
Fold Section
Cover
S13
: Feed Table Sheet Detection Switch : Feed Table Sheet Detection Switch
Actuator
mm
(0.08"
- 0.20")
ON when the actuator
is pushed by
2 - 5 mm (0.08" - 0.20").
Check the clicking
sound when opening
the fold section cover
slowly.
503013
3_6_1A
S13
3-7