The Rear Ports - Billion BIPAC 8500 User Manual

Billion BIPAC-8500 / 8520 SHDSL VPN Firewall Bridge / Router

The Rear Ports

*6
＊
Port
Power Switch
1
PWR
2
3 RESET
LAN
4 1X —
(RJ-45 connector)
CONSOLE
5
LINE
6 1X —
(RJ-11 connector
Chapter 2: Installing the Router
5
Only the BIPAC-8520 has two Line jack ports. BIPAC-8500 has one.
Power ON/OFF switch
Connect the supplied power adapter to this jack.
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
four LAN ports when connecting to a PC or an office/home
4X
network of 10Mbps or 100Mbps.
Connect a PS2/RS-232 cable to this port when connecting to a
PC's RS-232 port (9-pin serial port).
Connect the supplied RJ-11 ("telephone") cable to this port when
2X
connecting to the A SHDSL line.
4
Meaning
1
3 2
8