Billion BIPAC 8500 User Manual page 76

Billion BIPAC-8500 / 8520 SHDSL VPN Firewall Bridge / Router
Configure a new VPN Connection
Connection Name: A user-defined name for the connection (e.g. "connection to office").
Local:
Local Network: Set the IP address, subnet or address range of the local network.
Single Address: The IP address of the local host.
Subnet: The subnet of the local network. For example, IP: 192.168.1.0 with netmask
255.255.255.0 specifies one class C subnet starting from 192.168.1.1 (i.e. 192.168.1.1
through to 192.168.1.254).
IP Range: The IP address range of the local network. For example, IP: 192.168.1.1,
end IP: 192.168.1.10
Remote:
Secure Gateway Address (or hostname): The IP address or hostname of the remote
VPN device that is connected and establishes a VPN tunnel.
Network: Set the IP address, subnet or address range of the remote network.
Proposal:
Proposal: Select the IPSec security method. There are two methods of checking the
authentication information, AH (authentication header) and ESP (Encapsulating Security
Payload). Use ESP for greater security so that data will be encrypted and authenticated.
Using AH data will be authenticated but not encrypted.
Chapter 4: Configuration
72