Installation Preparation; Installation Warnings - Cisco Firepower 9300 Hardware Installation Manual

Installation Preparation

•
•
•
•
•
•
•
•

Installation Warnings

Be sure to read the
9300.
Take note of the following warnings:
Warning Statement 1071-Warning Definition
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS
Warning
Statement 12-Power Supply Disconnection Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect
the power at the circuit breaker on DC units.
Installation Warnings, on page 39
Safety Recommendations, on page 41
Maintain Safety with Electricity , on page 42
Prevent ESD Damage , on page 42
Site Environment, on page 43
Site Considerations, on page 43
Power Supply Considerations, on page 43
Rack Configuration Considerations, on page 44
Regulatory and Compliance Safety Information
2
C H A P T E R
document before installing the Firepower
Cisco Firepower 9300 Hardware Installation Guide
39