Mount and Connect
Rack-Mount the Chassis
Figure 36: Secure Chassis Ears to Rack with Screws
What to do next
Replace the components that you removed to rack-mount the chassis. For information on replacing Firepower
9300 components, see
Maintenance and Upgrade, on page
59.
Ground the chassis. See
Ground the Chassis, on page 50
for the procedure.
Install the FIPS opacity shield if necessary. See
Install the FIPS Opacity Shield, on page 52
for the procedure.
Continue with
Connect Cables, Turn on Power, and Verify Connectivity, on page
56.
Cisco Firepower 9300 Hardware Installation Guide
49