Cisco Firepower 9300 Hardware Installation Manual page 25

Overview
Figure 14: FPR9K-NM-2X40G-F
1
3
5
The following table describes the cable specifications needed to keep the insertion loss as low as possible.
Table 2: 40-G BASE-SR Cable Specifications
Interface
Ethernet 40-G BASE-SR4
850 nm wavelength
MPO-12 port adapter
Captive screw/handle
Bypass LED BP:
• Green—In standby mode.
• Amber, flashing—Port is in hardware
bypass mode, failure event.
• Amber—Port is in hardware bypass
mode, forced.
Network activity LEDs:
• Amber—No connection, or port is
not in use, or no link or network
failure.
• Green—Link up, no network activity.
• Green, flashing—Network activity.
40-G Network Module with Hardware Bypass
2 Ethernet X/1
Ports 1 and 2 are paired together to form
a hardware bypass pair.
4 Ethernet X/2
Ports 1 and 2 are paired together to form
a hardware bypass pair.
Supported Cable
50 microns core diameter
2000/4700 (OM3/4) modal bandwidth (MHz*km)
50 m cable distance
Cisco Firepower 9300 Hardware Installation Guide
21