Table of Contents
Advertisement
9.3.2.9 Detector Registration
To register a detector:
• Ensure that you have an Internet connection.
• Ensure that you have the serial number of the detector you wish to register together with either the
Activation Key or the activation QR code.
The Activation Key and QR code may be obtained from:
• The Registration Sheet supplied with detector
• Site records
• The label inside detector wiring compartment
• By contacting your Honeywell Customer Support
Tap on the preferred method for entering this information
and then either enter the Serial Number and Activation
Key manually or scan the QR code as applicable.
Your security certificate will then be updated and you will
now be able to access this detector.
To register further detectors, tap on 'SETTINGS' from the
home screen and tap on 'Detector Registrations'. Tap on
the '+' icon in the top right-hand-corner of the screen and
repeat the process above.
Note
If the registration of the Searchzone Sonik detector fails, it may be for several reasons:
1) the detector is already registered to another company
2) the detector does not exist
3) the Activation Key is already in use
4) the Activation Key and/or Serial Number is not valid
9.4 Connecting to Detectors
9.4.1 How to Connect to a Searchzone Sonik Detector
This section assumes that the Searchzone Sonik detector has been already registered to the company
account. If it has not, then read section 9.4.2 Making an Ad-Hoc Connection to the Detector.
After logging into the Searchzone Sonik mobile App, you
can use Bluetooth to search for Searchzone Sonik detectors
that are in range. If Bluetooth is not switched on, the App
will prompt the user to switch it on.
PN 2331M1220 Issue 1
Searchzone Sonik − Technical Manual
9 Mobile App
47
11/2018
Advertisement
Table of Contents
