Table of Contents
Advertisement
After successfully connecting to the detector, you will be
prompted to enter a 4-digit access PIN .
CAUTION
If logging in for the first time, you must set a new
PIN by clicking on 'set new access PIN'.
9.4.2 Making an Ad Hoc Connection to the Detector
If normal connection to a detector is not possible, a temporary ad-hoc connection can be established as
follows:
1. Obtain the Activation Key and Serial Number of the detector. The Activation Key may be obtained from:
The registration sheet supplied with that detector
Site records
The label inside detector wiring compartment
By contacting your Honeywell Customer Support
2. Ensure the mobile device is NOT connected to the Internet. Disconnect it from Wi-Fi and from the mobile
data. The easiest way to do this is to place the mobile device into Airplane Mode.
3. Switch on Bluetooth on the mobile device.
4. Log in to the Searchzone Sonik mobile App.
5. Tap on 'DETECTORS' to search for Searchzone Sonik detectors in range.
6. Select the desired Searchzone Sonik detector.
7. Scan the QR code as displayed on the registration sheet or on the internal label. Alternative, manually
enter the Serial Number and Activation Key.
8. Enter the 4-digit PIN set for that detector.
When using an ad hoc connection, you can connect to a Searchzone Sonik detector only within the given
session. You can change the PIN during this ad hoc session. After disconnecting from the detector, future
connection will require re-entering of the Activation Key and Serial Number, or re-scanning the QR code.
PN 2331M1220 Issue 1
Searchzone Sonik − Technical Manual
9 Mobile App
49
11/2018
Advertisement
Table of Contents
