Operation; Status Signalling; Visual Status Indicator - Honeywell SEARCHZONE SONIK SZSK-SMG Series Technical Manual

8 Operation

8.1 Operation
This chapter describes the operation of Searchzone Sonik in different states (Normal, Alarm, Fault, Periodic Test).
8.2 Status Signalling
Searchzone Sonik utilizes several outputs to indicate its status, namely the high visibility indicator, the mA Loop, relays and digital
communication interfaces (Bluetooth, HART and Modbus). The following sections describe the instrument behaviour.
8.2.1 Visual Status Indicator
NOTE:
The visual status indicator is not considered a safety output. Its behaviour is configurable and may indicate different states than other
outputs.
Searchzone Sonik is equipped with a high visibility LED status indicator the function of which is to visually indicate the status of the
instrument. See the following table for behaviour configuration information:
Operation without Colour
Bluetooth
Fault Yellow
Inhibit Yellow
Warning Yellow
Normal Green
Normal Green
Normal None
Alarm Red
Over-range Red
Operation with Colour
Bluetooth
Fault Yellow
Inhibit Yellow
Warning Yellow
Normal Blue
Normal Blue
Alarm Red
Over-range Red
Connecting Blue
Connected Blue
Warning Blue alternating
PN 2331M1220 Issue 1
Flashing
Yes
No
Yes
No
Yes
No
Yes
Yes
Flashing
Yes
No
Yes
No
Yes
Yes
Yes
Yes
No
No
Searchzone Sonik − Technical Manual
8 Operation
Setting
Default
Default
Default
Default
Optional
Optional
Default
Default
Setting
Default
Default
Default
Default
Optional
Default
Default
Default
Default
Default
39
11/2018