Dip Switches - Pro-face PS-3650A Series Hardware Manual

PS-3650A/PS-3651A Series Hardware Manual

2.4 DIP Switches

The DIP Switches are mounted on the circuit board under the Fan Unit or the Memory Slot Cover. For details
on how to remove the Fan Unit or the Memory Slot Cover, refer to the following section.
3.2.1 Main Memory Installation (page 3-7)
SEE
DIP Switch Locations
Switch
Switch Name
Location
A System Set SW1
Serial Mode Select
B
SW
C System Set SW2
2-14
• Make sure to turn off the power supply before using the DIP Switches. Adjusting
the DIP Switches while power is supplied may cause a unit malfunction or dam-
age.
• Be sure to confirm which settings will be used by other connected devices and
set the DIP Switches accordingly. Failure to do so can result in a unit malfunction
or damage.
10-point DIP Switch. For the switches details, see
SW 1 (page2-15).
10-point DIP Switch. Designates COM1 communication settings.
For the switches details, see
17).
4-point DIP Switch. For the switches details, see
SW 2 (page2-19).
Description
Serial Mode Select SW (page2-
System Set
System Set