Procedure
1. Navigate into the parameter view.
Navigating in the views (Page 71)
2. Select the parameter "User PIN" [27].
3. Use the
The message "USER PIN ON" (User PIN enabled) appears for 2 seconds.
Result
The user PIN is enabled.
9.2.25.2
Disable user PIN
Requirement
The user PIN is enabled.
Procedure
1. Navigate into the parameter view.
Navigating in the views (Page 71)
2. Select the parameter "User PIN" [27].
3. Use the
4. Select YES with the
5. Use the
The message "USER PIN OFF" appears for 2 seconds.
SITRANS P320/P420 (mA/HART)
Operating Instructions, 06/2018, A5E44852162-AA
button to confirm.
button to confirm.
or
button.
button to confirm.
9.2 Parameter assignment over device with display
Parameter assignment
135