Disable Write Protection Using Pin In Simatic Pdm; Replacing A Device; Making Settings Locally - Siemens SITRANS P DS III Operating Instructions Manual

8.7.8.3

Disable write protection using PIN in SIMATIC PDM

Procedure
1. In the "Device" menu, select the "Write protection" command.
2. Click on the "OFF" button.
3. Enter the user-defined PIN, the default PIN, or the super PIN.
See also
Overview (Page 144)
8.7.9

Replacing a device

Replacing a PROFIsafe device with firmware <= 0301.02.02 or a PROFIBUS device with a
PROFIsafe device with firmware 0301.02.03 or higher
When shipped, PROFIsafe is disabled on the replacement device.
Requirement
Import the PROFIsafe EDD as of version 01.02.03 to the device catalog of SIMATIC PDM.
Process
1. Replace the device.
2. Configure the device. You have two options:
The EDD of the new device must be reassigned to that of the replaced PDM object. Making
the reassignment in the "Process Devices - Network View" of the SIMATIC Manager.
8.7.9.1

Making settings locally

Procedure
1. Set mode 16.
2. Set the device mode [129] with the [↑] and [↓] keys.
3. Save with the [M] key.
SITRANS P DS III with PROFIBUS PA
Operating Instructions, 06/2013, A5E00053276-07
– Making settings locally
– Host system
Functional safety
8.7 PROFIsafe
155