Commissioning The Device Without Display - Siemens SITRANS Series Operating Instructions Manual

1.2

Commissioning the device without display

Introduction
In this section, you will learn how to commission the device step-by-step.
Before you start, please read the following safety information:
● General safety information (Page 19)
● Basic safety information: Installing/mounting
● Basic safety information: Connecting
● Basic safety information: Commissioning
Read the entire device manual in order to achieve the optimum performance of the device.
Procedure
1. Mount the device.
Installation (except level) (Page 43)
Installation (level) (Page 46)
2. Connect the device.
Connecting the device (Page 62)
3. Switch on the power supply.
Switching on the supply voltage (Page 84)
SITRANS P320/P420 (mA/HART)
Operating Instructions, 06/2018, A5E44852162-AA
1.2 Commissioning the device without display
Getting Started
13