Nameplate Layout - Siemens SITRANS Series Operating Instructions Manual

Description

4.3 Nameplate layout

● The cover over buttons
of the enclosure. The nameplate with general information is located on the cover over
buttons.
4.3 Nameplate layout
Nameplate with general information
The nameplate with the article number and other important information, such as design details
and technical data, is located on the cover over the buttons.
①
②
③
④
⑤
⑥
Figure 4-2
26
①
Article number (MLFB number)
Serial number
Materials, connection, diaphragm, O-ring, oil
Minimum/maximum measuring span
Nominal pressure
Degree of protection
Example
, under which there are 4 buttons, is located on the upper face
⑦
⑧
⑨
⑩
⑪
Conformity with country-specific directives
QR code to the mobile website with device-
specific information
Note operating instructions, certificates
and approvals
Internal code with information for manufac‐
turer
Firmware and hardware identification
SITRANS P320/P420 (mA/HART)
Operating Instructions, 06/2018, A5E44852162-AA