Status Display Of The Ethernet Interface; Status Display Of Redundant Power Supply - Siemens SIMATIC IPC647E Operating Instructions Manual

Product description
1.4 External design of the device
1.4.7.2

Status display of the Ethernet interface

The Ethernet interfaces are numbered on the enclosure to identify them clearly.
The numbering by the operating system can differ.
Status display
LED 1
LED 2
1.4.7.3

Status display of redundant power supply

Status display
Status LED (see
marking)
26
Meaning
Connection status
Data transmission rate
Meaning
Status of the power
supply module
Status Meaning of the status
OFF
No cable connected
•
Cable disabled
•
Interface disabled
•
GREEN
Active cable connected
•
GREEN flashing
Data transfer active
•
OFF
10 Mbps
•
GREEN
100 Mbps
•
YELLOW
1000 Mbps
•
Status Meaning of the status
OFF
Module is out of service, no
•
redundancy in effect.
GREEN
The module is in operation and
•
functioning.
Redundancy is in effect when
•
both modules are operating.
RED
Module failed, no redundancy
•
in effect.
Operating Instructions, 11/2018, A5E45589180-AA
SIMATIC IPC647E