Siemens SIMATIC IPC647E Operating Instructions Manual page 65

9. Select
selection.
– The mounted drive is provided with a check mark in the list
– You will find the assignment of the drive to the installation location in the drive cage
10. Select "Create Volume".
The following screen shows the details on the RAID system just set up (RAID Volume).
The onboard RAID system is set up.
11. Press the <Esc> multiple times in succession until you reach the "Main Page" of the
firmware/BIOS menu.
Note
Confirm "Exit Discarding Changes" message with "YES"
If when exiting the firmware/BIOS menu with the <Esc> button, the warning message
"Exit Discarding Changes" is displayed, confirm this message with "Yes".
The prenumbered settings are saved nonetheless and you can leave the firmware/BIOS
menu.
12. In the Main Page of the firmware/BIOS menu, select "Continue".
Your device continues the boot operation and switches on.
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
①
from the list of drives you wish to install in your system and confirm your
after the drive name, see
③
.
Operating the device
5.4 Operating RAID systems
②
.
65