Siemens SIMATIC IPC647E Operating Instructions Manual page 77

3. Click the warning icon.
4. In the warning message "Certificate is invalid," click on "Show certificates".
5. In the "General tab", click on "Install certificate...".
6. Select "Local Computer" as storage location and confirm your selection with "Next".
7. Confirm the subsequent warning.
8. Select the option "Save all certificates in the following storage location" and define the
storage location for the certificate.
9. Select the option "Trusted master certification bodies" and then click on "OK" > "Next" >
Finish".
10. Close Internet Explorer and open it again.
This installs the certificate and configures the "maxView Storage Manager".
The user interface for "maxView Storage Manager" is now available in Internet Explorer.
Monitor hardware RAID system with "maxView Storage Manager"
You can find detailed information on the use of "maxView Storage Manager" in the user
guide to the software, see "Software and documentation for the hardware RAID system
(Page 69)".
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
Operating the device
5.4 Operating RAID systems
77