Siemens SIMATIC IPC647E Operating Instructions Manual page 14

Product description
1.2 Product highlights
High productivity through fast data processing
● 8th generation Intel® processors: Xeon, Core i7, Core i5 or Core i3 with up to 6 cores / 12
threads
● Graphics controller (630/P630) integrated in the processor up to 4 K Ultra HD resolution
● Maximum performance, e.g. through Intel C246 chipset, DDR4 memory with support of
dual channel technology
● High data transfer rates, e.g. via PCI Express Technology Gen 3, USB 3.1 Gen 2
SuperSpeed + (10 Gbps), M.2 NVME SSD
● Low noise impact thanks to closed-loop fan
High system availability thanks to minimization of standstill times (availability depending on
configuration)
● High data security through RAID systems: Onboard RAID system or hardware RAID
system
● RAID1 system: Data mirroring on two SATA or SAS drives, including in removable racks,
and optionally with additional SSD (for operating system)
● Hot swap (swapping of drive during operation) in removable drive bays in RAID systems
● Fast identification and swapping of drives under error conditions through alarm LEDs for
RAID systems
● Efficient event diagnostics through the SIMATIC IPC DiagBase or DiagMonitor monitoring
software (optional)
● Remote control and remote maintenance of the device through iAMT (Intel® Active
Management Technology)
● SSD as 2.5" SATA or M.2 NVMe and ECC memory (optional)
● Replacement of power supply module for redundant power supply in runtime
Differentiated safety concepts
● Lockable front door for component protection against unauthorized access, e.g.
– Software dongle in USB connection behind the front door
– Front fan can only be replaced when front door is open
– All components inside the device can only be accessed when front door is open
● Device monitoring through operating displays on the front for Ethernet; alarms for fans,
temperature, Watchdog and drives in RAID1 systems
14
Operating Instructions, 11/2018, A5E45589180-AA
SIMATIC IPC647E