Installing Ethernet Connector Strain Relief - Siemens SIMATIC IPC227G Operating Instructions Manual

Installing and connecting the device
3.3 Connecting the device
Procedure
3.3.7

Installing Ethernet connector strain relief

The Ethernet connector strain relief prevents accidental loosening of the Ethernet connector
from the device. The Ethernet connector strain relief is available as an accessory.
Procedure
34
Insert the metal plate of the strain relief into the
second last groove on the left and right sides.
Secure the strain relief with an M3 × 6 setscrew on the
left and right sides respectively.
Secure the connection cables with cable ties to the
cable strain relief.
Unscrew the marked retaining screw.
Insert the metal plate of the Ethernet connector strain
relief into the second groove.
Operating Instructions, 07/2022, A5E50059933-AC
SIMATIC IPC227G