Connecting The Grounding Cable - H3C S1850 Series Getting Started Manual

Figure 9 Connecting the console cable

Connecting the grounding cable

CAUTION:
Correctly connecting the grounding cable is crucial to lightning
protection and EMI protection.
To connect the grounding cable:
Use a Phillips screwdriver to remove the grounding screw from
1.
grounding hole in the rear panel of the chassis. Use the
grounding screw to attach the ring terminal of the grounding
cable to the grounding hole. Fasten the grounding screw into the
grounding hole.
Use needle-nose pliers to make a loop at the other end of the
2.
cable.
8