Align the two mounting holes in the switch chassis bottom with
4.
the two screws on the wall and hang the switch.
Make sure the Ethernet ports are facing downwards and the
5.
chassis side panels are perpendicular to the ground.
Figure 8 Wall-mounting the switch
(1) Mounting hole in the switch chassis bottom
Connecting cables
Connecting the console cable
To connect the switch to a configuration terminal, for example, a PC,
by using the console cable:
Connect the DB-9 connector of the console cable to the serial
1.
port on the PC.
Connect the RJ-45 connector of the console cable to the
2.
console port on the switch.
1
7