Troubleshooting - H3C S1850 Series Getting Started Manual

Figure 14 Accessing the Web GUI of the switch

Troubleshooting

Table 1 Common issue troubleshooting
Issue
Power status
LED off
LAN port
LED off
Troubleshooting procedure
1. Verify that the power cord is connected
correctly.
2. Verify that the power switch is turned on.
3. If the issue persists, contact H3C Support.
1. Verify that the network cable is connected to
the Ethernet port securely.
2. Connect the network cable to two Ethernet
ports on the switch. If the LEDs for the two
ports are both on, the network cable is in good
condition. If the LEDs are not on, the network
cable is faulty. Replace the network cable.
3. If the issue persists, contact H3C Support.
12