Selection Of X1/Z1 And X2/Z2 Reports To Be Printed In The Stacked Report Sequence (#2620) - Sharp ER-A410 Instruction Manual

Selection of X1/Z1 and X2/Z2 reports to be printed in the stacked report
sequence
PGM 2
Your register is equipped with the stacked report printing function that enables multiple X/Z reports to be printed
in sequence with only a single request.
Procedure
@
.
2620
@
* 1
Job no.
• A maximum of 70 steps are programmable. "1 step" means the memory size used for one no-
Note
range type job no. The range type job no. needs "8 steps".
• When the Z of stacked report is initiated, X only reports will be skipped.
Job code numbers to be used are as follows.
*1: Job no. Report name
00 General
10 Full department
Full department group
13
PLU/UPC
20
PLU/UPC stock
24
PLU/UPC zero sales
27
29 PLU/UPC price category
30 Transaction
Cash in drawer
31
Commission sale
32
Full cashier
50
60 Hourly sales information
70 Daily net report
PBLU report
80
*3: Both range setting and full setting are allowed.
Example
To print reports 10 and 13 as a stacked report.
2620
To cancel the stacked report sequence
For full reporting (non-range report)
* 2
@
Start range
parameter
To program any Job no.
*2: Start/End range parameter
*3 Start code/End code (max. 5/13 digits)
*3 Start code/End code (max. 5/13 digits)
*3 Start price amount/End price amount
*3 Start time/End time (0 thru 2330)
*3 Start PBLU code/End PBLU code (1 thru 9999)
Key operation
. @
2620
ı
10
ı
13
a
For individual reporting
*2 s
End range
parameter
Print
a
Note
Range report is available
only in the X1 mode.
131