Cleaning The Print Head - Sharp ER-A410 Instruction Manual

5

Cleaning the print head

When the printed text is getting dark or faint, paper dust may be stuck to the print head. Clean the print head as
follows:
Print head
182
1.
Turn the mode switch to the " OFF " position.
2.
Remove the printer cover.
3.
Pull the print head release lever all the way forward (after it
stops at one position, continue pulling forward until it stops
Pull all the
way forward
again and cannot be pulled forward any further).
4.
Clean the print head with a soft rag moist with ethyl alcohol
or isopropyl alcohol.
5.
Return the print head release lever to its original position
immediately after cleaning.
6.
Replace the printer cover.
Caution:
• Never touch the print head with a tool or anything hard
as it may damage the head.
• The paper cutter is mounted on the printer (receipt side).
Be careful not to cut yourself.